Tutorial Tuesday: How To Make A Shoe Slip Cover And Attach Armor

Tutorial Tuesday: How To Make A Shoe Slip Cover And Attach Armor

Tutorial Tuesday: How To Make A Shoe Slip Cowl And Connect Armor

Costumes are diverse and designs will be wildly totally different from one cosplay to the subsequent. There are a number of items, although, that span the gamut and might really reduce down in your prices if you’re prepared to reuse supplies and plan accordingly.

One hack for veteran cosplayers is reusing a single pair of footwear for a number of cosplays. So as to take action, moderately than remaking a pair of footwear or attaching costume items on to footwear, the cosplayer will as a substitute draft a slipcover sample for his or her footwear and easily remake the duvet for every cosplay.

Be taught: The best way to make shoe armor with eva foam

Shoe Slip Cover and Armor Tutorial

On this trend, your base shoe retains its high quality, and your slipcover with armor or costume attachments will be eliminated and saved with the remainder of the matching costume.

Even when pattern-drafting isn’t your ‘factor’, these 5 straightforward steps will enable you create your very personal shoe slipcover that you should use time and time once more!

1. Choose the suitable pair of footwear.

Shoe Slip Cover and Armor Tutorial

It appears easy, however this step is a very powerful. When you can remake your slipcovers to repair errors, your footwear would be the fixed on this complete course of and will final you many years if chosen accurately.

Once I’m choosing the proper footwear for cosplay, I search for a number of key issues:

  • Consolation. Which means once I put them on, I’ve no rubbing factors of contact. Ensure you can stroll simply and that there’s padding to maintain you in your toes comfortably throughout a conference.
  • Design. Most of my cosplays look greatest in heels, as feminine designs are likely to beg for a female shoe and construction. Choose a pair of heels which have a wider heel level (simpler to stroll in!) and that aren’t too tall. I have a tendency to stay with heels which are round 3.5” tall.
  • Slip-On. I don’t need to spend all of my time messing with ties or coping with a rubbing zipper. For me, essentially the most important piece to choosing footwear is ensuring they’ll slip on with out further palms to assist. It makes dressing up a lot simpler, after which there’s nothing in your slipcover to snag on!

2. Put one shoe on and wrap it in Cling Wrap adopted by Duct Tape.

Shoe Slip Cover and Armor Tutorial

Learn: The best way to Make Edibles With out Scent

To create your sample, you actually solely must work with one shoe, as you’ll simply mirror the sample for the opposite!

When wrapping your shoe in Cling Wrap, make sure that your leg/foot is positioned on the bottom as it will naturally whenever you stand so your sample isn’t warped. I usually wrap across the arch first after which work my manner over the toe and across the again of my heel. Make sure you wrap up your leg for so far as you need your sample to increase. I normally go to crew sock peak.

With the Duct Tape, start by wrapping up across the arch to the highest of your foot. Then, place a bit of tape on the toe and lay it firmly alongside the midline of your foot as much as the highest of the ‘crew sock’ line. You gained’t must Duct Tape the precise pointed heel of the shoe. Moderately, begin on the base of your foot’s heel and do a midline tape as much as the crew sock peak. Tape across the ankle (ensuring to not pull the tape tight however merely lay it on the Cling Wrap) after which tape over all uncovered sections together with the underside toe space and backside of your foot’s arch. Keep away from the pointed heel.

3. Hint and Reduce Your Sample!

Shoe Slip Cover and Armor Tutorial

There are three foremost traces to attract in your sample.

  • Draw the highest midline from toe to crew sock peak.
  • Draw the again midline from heel base (not together with pointed heel) to crew sock peak.
  • Draw across the backside fringe of your shoe from the precise heel (not together with pointed heel) to the toes and again round.

After your sample is traced, merely reduce alongside every line by way of each the Cling Wrap and Duct Tape (watch out to not reduce your socks/shoe!). I usually begin by slicing down the highest midline to the toes, pulling the complete sample off of my shoe as soon as I attain the underside sample line.

Shoe Slip Cover and Armor Tutorial

Reduce the again midline after which reduce the underside edge line. You’ll find yourself with an ‘inside’ shoe piece, an ‘outdoors’ shoe sample piece, and a backside piece. Reduce the underside piece proper the place the bottom of the shoe meets with the pointed heel, as you aren’t placing your shoe cowl on the pointed heel itself. As an alternative, the duvet will wrap across the shoe above the pointed heel, and the underside panel will cease the place it meets the pointed heel.

After this, I flatten every bit, label them ‘inside’, ‘outdoors’, and ‘backside’ with an arrow pointing to the within or outdoors panel AND an arrow pointing to the place the highest midseam meets the underside panel. I then hint every of the three items onto heavy cardstock for longevity functions.

Shoe Slip Cover and Armor Tutorial

4. Switch your sample onto 4-way stretch cloth and stitch your items collectively.

Studying: The best way to Make a Sphere in SOLIDWORKS

The important thing right here is the stretch, and due to the stretch, I usually contemplate my sample edges as having included the seam allowance. You’ll want to check this out in your cloth although, as some stretch greater than others and might have roughly seam allowance relying on the material.

After every panel is reduce, sew the highest midseam collectively first. Hold the again midseam open and stitch a fastener – whether or not it’s a zipper or velcro or snaps – as your closure. I normally go for velcro for my shoe covers.

After the highest midseam is sewn, then align your backside panel by matching the arrow you made in your high midseam. Keep in mind to stitch with proper sides in. After that is full, flip proper sides out, and you must see the form of your shoe cowl come collectively! Don’t neglect to stitch your again midseam attachment.

5. Put the shoecover on and glue armor items with Material Glue.

Shoe Slip Cover and Armor Tutorial

At this level, your shoecover is basically full. Now, you possibly can simply connect armor items completely to the slipcover with adhesive.

Shoe Slip Cover and Armor Tutorial

I’ve discovered that the only option for that is Tremendous Material Adhesive by Aleene’s Authentic. It’s extremely versatile (which is nice because it’s happening a stretch cloth) and has one of the best maintain over time.

Shoe Slip Cover and Armor Tutorial

When gluing armor to your shoecover, at all times make sure that to have a protecting protect beneath (I exploit Cling Wrap below the slipcover) and have the slipcover ON YOUR SHOE whereas the glue dries.

In the event you’re trying so as to add a little bit extra traction to the underside the place you coated the shoe tread with cloth, glue some rubber shoe soles to the bottom. Giant sheets of rubber shoe sole will be bought on Amazon and reduce to the scale you want in your shoe.

Save your footwear and check out a slipcover in your subsequent cosplay. Your pockets (and your toes!) will thanks for it.

Extra: DIY – Make a Belt Buckle from a Craft-Beer Can

Leave a Reply

Your email address will not be published. Required fields are marked *