Subnautica: Below Zero walkthrough: What to fabricate first guide

Subnautica: Below Zero walkthrough: What to fabricate first guide

Subnautica: Under Zero walkthrough: What to manufacture first information

Subnautica: Under Zero doesn’t provide you with a lot (any) assist or route because it drops you right into a freezing alien ocean. It’s complicated and onerous to resolve what to do first. We’ve been by {that a} couple instances now, and we’re right here that can assist you get began. Your first hour or so isn’t going to contain a lot exploration and even survival. As a substitute, we’ll be getting higher geared up to make exploration and survival that a lot simpler whenever you take your subsequent steps … er, swims?

On this Subnautica: Under Zero information, we’ll stroll you thru reaching the Drop Pod and gathering your first sources to manufacture silicone rubber, a survival knife, fins, in addition to your first battery, a scanner, fiber mesh, a commonplace O2 tank, and the Seaglide.

Study: Easy methods to make a knife in subnautica

Desk of contents

  • Get to the Drop Pod
  • Pinning recipes
  • Fabricate a scanner
  • Fabricate a survival knife and fins
  • Fabricate fiber mesh and an ordinary O2 tank
  • Fabricate a Seaglide

Get to the Drop Pod

Subnautica: Below Zero guide: What to fabricate firstPicture: Unknown Worlds Leisure by way of Polygon

When you’re by the preliminary pleasure, search for the Drop Pod’s icon in your HUD. Observe it right down to the water and begin swimming. Don’t fear about gathering something alongside the way in which — your aim right here is simply to get your bearings and attain the Drop Pod.

Pinning recipes

On the Drop Pod’s fabricator, you’ll have a number of recipes already. When you choose one, you’ll have the choice to pin recipe. This provides an icon and record of supplies to your HUD and allows you to monitor what you’ve gathered and what number of you’ll have to fabricate that merchandise.

You too can pin recipes from the blueprints tab of your PDA’s menu.

Fabricate a scanner

Let’s begin with one thing you’ll use all through your recreation of Subnautica: Under Zero, a scanner. To make a scanner, we’ll want 1 titanium and (at the least) one battery (1 copper, 2 ribbon crops).

Subnautica: Below Zero guide: What to fabricate firstPicture: Unknown Worlds Leisure by way of Polygon

Head out into the ocean and swim alongside the underside. Titanium and copper each come from limestone outcrops. Maintain smashing rocks till you get at the least certainly one of every.

Subnautica: Below Zero guide: What to fabricate firstPicture: Unknown Worlds Leisure by way of Polygon

Whilst you’re gathering these, preserve an eye fixed out for caves a bit of deeper — within the 30 meter vary or so. That is the place you’ll often discover ribbon crops. They seem like glowing, inexperienced, vase-shaped crops.

Studying: Easy methods to Change the Measurement of Intervals in Google Docs

Upon getting sufficient titanium, copper, and ribbon crops, head again to the Drop Pod and fabricate your scanner.

Fabricate a survival knife and fins

Together with your scanner in hand, head out once more. Scan something and the whole lot you discover to assemble details about your environment. Your actual aim right here is to search out creepvines.

Subnautica: Below Zero guide: What to fabricate firstPicture: Unknown Worlds Leisure by way of Polygon

Creepvines are tall stalks of seaweed. They’re very apparent whenever you spot them, however they’re solely present in sure areas. Whenever you exit the Drop Pod, make (most of) a U-turn to your left and begin swimming. Look ahead to the tall Creepvines within the distance.

Whenever you first discover Creepvines, you’ll be able to’t harvest all of them. You may solely gather creepvine seed clusters — the glowing pink bulbs in a bunch round sure creepvines. Seize two. (These take up 4 slots in your stock and also you don’t want many instantly.)

In your manner again to the Drop Pod, seize at the least one titanium.

On the fabricator, flip your 2 creepvine seed clusters into 4 silicone rubber. Now you may make a survival knife (1 titanium, 1 silicone rubber) and a few fins (2 silicone rubber). The fins will pace up your swimming. The knife allows you to defend your self and collect some new sources. Which brings us to …

Fabricate fiber mesh and an ordinary O2 tank

Again outdoors, return to the creepvines you simply discovered. Use your new survival knife to hack at any of the creepvines.

Subnautica: Below Zero guide: What to fabricate firstPicture: Unknown Worlds Leisure by way of Polygon

This can drop some creepvine samples into your stock. Just like the creepvine seed clusters, theses take up 4 slots every, so solely collect the two you want.

Learn: Cosplay 101: Easy methods to Construct a Prop Gun

In your manner again to the Drop Pod, collect at the least two titanium. On the fabricator, flip the creepvine samples into one fiber mesh, after which use 1 fiber mesh and 2 titanium to manufacture a commonplace O2 tank.

This enormously will increase the period of time you’ll be able to spend underwater.

Fabricate a Seaglide

The very last thing to manufacture earlier than you got down to discover is a Seaglide. It is a handheld motor that quickens your swimming by loads. That is the primary blueprint you’ll have to search out by scanning fragments out within the ocean — one thing you’re going to spend the remainder of Subnautica: Under Zero doing.

Now that you just’re well-equipped together with your scanner, fins, and commonplace O2 tank, head again into the ocean. Go straight out of the door and swim down into the ravine you come to.

Subnautica: Below Zero guide: What to fabricate firstPicture: Unknown Worlds Leisure by way of Polygon

Swim straight down alongside the valley’s wall and also you’ll discover a Seaglide fragment. Scan it together with your scanner. You’ll get a notification studying “Seaglide fragment scanned. General progress: 33% (1/3).” Now you simply have to search out two extra fragments.

Take a proper and comply with the underside of the valley to discover a second fragment.

For the third, return to the Drop Pod, this time, take a U-turn from the door and swim down into a special valley. Look across the valley flooring for a 3rd Seaglide fragment.

When you’ve scanned the third fragment, you’ll get a “New blueprint synthesized” notification. Verify the blueprint to search out the supplies you want — 1 battery (1 copper, 2 ribbon crops), 1 lubricant (2 creepvine seed clusters), 1 copper wire (1 copper), and 1 titanium.

Collect the supplies in your manner again to the Drop Pod and fabricate your new car.

Learn: DIY Bandana Prime

Leave a Reply

Your email address will not be published. Required fields are marked *