How to make a Roof Ladder Hook-DIY from Wood & Metal

How to make a Roof Ladder Hook-DIY from Wood & Metal

How one can make a Roof Ladder Hook-DIY from Wooden & Steel

When you’ve got work to do on the roof, you may discover it arduous doing it given the sloping nature of most roofs. Whereas duties near the gutter are straightforward to work on, these on the prime of the roof particularly near the apex are fairly difficult. Your ladder can’t keep on the apex therefore the necessity for a roof ladder with a hook or the addition of a roof ladder hook in your present ladder.

Shopping for a roof ladder is sort of expensive not to mention time consuming as you should purchase it then wait to have it delivered to your door. As for roof ladder hook, it could value you numerous, might not work together with your kind of roof or ladder and likewise must be delivered. This can be too late when your roof is leaking within the wet season.

Study: How one can make a roof ladder hook

The answer on our fingers is making your individual roof ladder hook. This may also help you climb the roof proper to the apex with out the danger of falling off. You’ve got a number of methods of constructing a roof ladder hook and we are going to cope with two under. You may select which one to make use of relying on the supplies you have got.

Contents present Technique 1: Making a Wood Roof Ladder Hook Provides Technique Technique 2: Making a Steel Roof Ladder Hook Provides Technique Security measures to look at

Technique 1: Making a Wood Roof Ladder Hook

For this technique, you’re going to make a roof ladder hook fabricated from wooden.

DIY ladder Hook from Wood
Wooden Hook


You’ll want the next supplies:

  • Commonplace 12-foot ladder
  • 4 brief boards of plywood
  • 2 lengthy plywood boards
  • Wood boards
  • Drill
  • Two clamps
  • Protractor
  • Screws
  • Measuring tape
  • Nails
  • Wooden noticed
  • Pencil or marker


You then observe these steps:

1. Measure the items of wooden

Step one on this course of is to measure the items of wooden to make sure they meet your wants. Put the 2 items of wooden facet by facet then test whether or not they’re of the identical size and width. This may be straightforward to see with each bare eye. If not, you’ll be able to at all times use the tape measure to test their dimensions. If one’s longer than the opposite, minimize of the surplus half with the noticed.

Whereas nonetheless preserving them facet by facet, measure 2/3 of the size of the items with the tape measure then mark this size with a pencil or marker.

2. Place the wooden on the ladder

Maintain one piece of wooden such that it’s on the skin of the ladder and the longer half is on the decrease facet of the ladder whereas the shorter half on the higher facet. The ladder ought to be positioned on a raised platform to imitate the slope of the roof.

Use a clamp to lock the wooden to the ladder to make it straightforward to work on it.

3. Drill the ladder and wooden

With the piece of wooden held to the skin of the ladder on the prime finish, drill a gap to undergo the ladder and piece of wooden. You solely have to drill one gap for this process as you gained’t want the second gap till you get the angles proper. Keep in mind, the roof on the apex is usually 45 levels and never 90°. That, nevertheless, will probably be taken care of within the later levels of this course of.

Repeat for the opposite piece of wooden ensuring the longer a part of the wooden is on the decrease facet of the ladder (the two/3) and the shorter facet on the higher facet (the 1/3). Place the piece on the skin then drill a gap by way of it and the ladder. Put the screws or bolts and nuts by way of them then tighten a bit.

4. Examine the angle of the wooden and ladder

Learn: How one can make Clean Touch upon YouTube

Utilizing the protractor, measure 45 levels between the ladder and the wooden on the shorter facet of the items of wooden. You may affirm this angle by measuring 135 levels on the decrease facet of the angle between the ladder and the piece of wooden (135° + 45° = 180°).

These angles, nevertheless, will not be the usual for each roof and you’ll have to discover the angle to your roof. You are able to do so by going to the top of the roof then measure the angle on the apex of the roof between the 2 slopes of the roof. You are able to do the identical contained in the roof or on the highest on the apex.

Mark these angles on the piece of wooden in readiness for the subsequent steps.

5. Lock within the angle

Upon getting the angle you need, get a brief piece of wooden, drill it with the ladder on the within a rung or two from the highest of the ladder. Put a screw or bolt and nut by way of it to lock it to the ladder. Don’t tighten it an excessive amount of because it’ll nonetheless want to maneuver about.

Alter the longer picket piece on the prime to the angle you need. Convey the shorter piece of wooden to satisfy the longer one (which remains to be on the measured angle). Drill a gap to hitch the 2 items of wooden then put a bolt by way of this gap. You may tighten the boosts to lock within the items. Do the identical for the opposite facet of the ladder.

6. Add reinforcements

As soon as the 2 items of wooden are in place, the subsequent step is reinforcing them in order that the ladder is robust sufficient to bear your weight. It’s best to put the reinforcements in two locations particularly on the junction of the 2 items of wooden, and on the different finish of the longer items of wooden.

For the primary reinforcement, take a chunk of wooden then place it beneath the joint between the 2 items of wooden already mounted to the ladder. Measure the size wanted then minimize it to form. With the drill, make a gap passing by way of the longer piece of wooden to the brand new one then put a bolt and nut in it. Do the identical for the opposite piece of wooden. I came upon that the drilling can weaken the items of wooden. You should utilize nails from the supporting piece of wooden’s facet to carry it in place as an alternative.

The second reinforcement is positioned on the decrease finish of the longer items of wooden. Measure a chunk of wooden becoming a member of the 2 longer items from the decrease facet. Reduce off the surplus lengths of the becoming a member of piece of wooden then use nails or screws to hitch it to the 2 items.

The rationale you place the supporting piece to the decrease facet is to guard the roofing supplies. It’s because the load of the ladder will probably be exerted on the becoming a member of piece relatively than the longer ones. It additionally reduces the angle of the hook making it higher at preserving the ladder in place.

7. Add extra reinforcements

Keep in mind the primary pair of screws we drilled into our ladder? Those on both facet holding the items of wooden to the ladder? It’s best to now add one other pair one on both facet of the ladder to strengthen it additional. After that, search for every other joints which aren’t sturdy sufficient then add screws or items of wooden.

8. Place the ladder onto the roof

As you may need famous, that is not a standard ladder and inserting it on the roof would require some talent and power in your finish. You are able to do this by lifting it up and inserting it proper on the apex ridge of the roof. The ladder will probably be on one face of the roof then the hook on the ridge with a small a part of it on the other face of the roof.

Identical to that, you have got a roof ladder hook including security to your work on the roof. Observe the security measures of utilizing ladders and luxuriate in your ladder.

Technique 2: Making a Steel Roof Ladder Hook

The strategy above may be intimidating to some because it wants plenty of measuring and slicing and different actions. It is vitally secure even for a learner for my part. The choice is to make a metallic roof ladder hook as shall be described under. This technique, nevertheless, can also be a bit harmful as you’ll be coping with sizzling metallic. With care, you’ll be able to pull it off fairly simply.


Learn: How one can Make a Tumbler Turner for Low-cost!!

You want the next gadgets:

  • Steel bar ideally fabricated from metal
  • Steel clamps
  • Blow torch
  • Items of wooden joined at a 45-degree angle thus forming a V form.


You then observe these steps:

1. Arrange your work station

First, you should put up the 2 items of wooden such that they make an inverted V form. That implies that the 2 ends of the V will probably be on the bottom whereas the ridge is on the prime of the form. Make sure the construction is firmly held in place to keep away from toppling over once you’re utilizing it.

2. Bend the metal

Whilst you have a alternative between many varieties of metals, you must give attention to utilizing metal because it’s probably the most dependable. Different metals may bend when beneath stress from the load of the ladder and the consumer.

On one facet of the V form, fasten the metal rod such that at the very least half of its size is hanging over the apex of the V form. You should utilize one of many metallic clamps to get a gradual grip on the metallic.

Warmth the center of the metal rod with the blow torch till it begins turning crimson. As you may need already seen, you should be very cautious with this process to keep away from burning your self with the recent metallic or blow torch.

As soon as the metallic is sizzling sufficient, use the opposite metallic clump to carry its unfastened finish. Bend it downwards in direction of the opposite leg of the inverted V form as a lot as you’ll be able to. If it could contact the opposite leg, the higher.

3. Add handles

You then want so as to add handles to the hook to carry the ladder on one finish and the roof on the opposite finish. Merely warmth the ends of the hook with the blow torch then bend them into the handles you need. You may add rubber or fabric on the top in touch with the roof to keep away from damaging the roof with the hook.

4. Put the hook on the roof

Your metallic hook will probably be prepared with the steps above. Merely carry the ladder with the hook hooked up then place it over the roof with the hook over the ridge of the home and also you’re good to go.

The excellent news is that you just don’t have to be correct with this sort of hook as any angle will work. So long as the hook is bent sufficient to hold the load of the ladder and the consumer, you’re secure. You can also make two hooks to your ladder for higher assist.

Security measures to look at

Apart from the precautions when utilizing a ladder, you also needs to watch out when making them with the above processes. It’s best to observe the next precautions:

  • Use thick gloves, googles and protecting clothes when working with sizzling metallic.
  • Watch out with nails and hammers as you may hit your fingers and the nails can prick you. Make certain the bottom is evident at your office to keep away from stepping on nails and saws.
  • Saws additionally current a problem as they will simply minimize your hand to shreds. At all times have your hand at a secure distance and minimize the wooden with out eradicating the noticed from the wooden with every stroke.
  • Make certain the ladder you utilize has functioning locks that are in good situation as properly.
  • By no means climb the roof with no spotter. That’s somebody on the bottom or on one other ladder to test in your progress as you’re employed on the roof. This particular person may also help forestall deadly accidents.
  • If the work is delicate, use a harness fixed on a steady a part of the roof and round your individual physique.
  • Given that you just’re utilizing the ladder on the roof, be sure that it’s correctly anchored on the hook earlier than you climb the ladder. If there’s one other means you’ll be able to anchor it similar to utilizing a chunk of rope, try this as properly.
  • Steer clear of energy traces as they pose a significant danger once you’re on the roof. When you’ve got some round, name an professional to do the roof work as an alternative.
  • A harness will add to the security of your rooftop actions. Purchase a top quality harness then tie it round your physique and a steady level on the roof. In case your ladder fails, the harness will forestall the accident.
  • Earlier than going up the roof, ensure you have inspected the integrity of the roof as you can be transferring weight to it. The easiest way to do that is thru the attic the place you’ll be able to test the well being of the picket beams and different components of the roof.
  • At all times shield the roof with padding when inserting a ladder on it. That is particularly essential when coping with asphalt roofs as they’re fairly delicate. Ladder pads are your finest wager on this case.
  • The ladder you utilize ought to be inspected to verify it has no damaged or unfastened components which will result in its breaking and your falling.
  • The ladder’s responsibility ranking ought to provide help to resolve on whether or not it’s regular sufficient to load a certain quantity of weight on it. This determine is often written on the ladder and ought to be your information when utilizing it. The rung locks ought to be spring-loaded to supply probably the most steady and most secure expertise. These identical locks ought to at all times be engaged earlier than you utilize the ladder to your security.
  • Earlier than you utilize the ladder on the roof, be sure the roof doesn’t have any grime or particles which will make it slippery. If you happen to discover any grime on the roof, clear it off earlier than performing work there.
  • Keep away from happening the roof when it’s moist except completely mandatory. On this case, the place of the ladder can enable you try this because you’ll be fully on it relatively than the roofing supplies.
  • Preserve off ladders if in case you have a phobia for heights. By now try to be figuring out your fears and happening the roof the place you’re the best level round with a worry of heights could be very dangerous as you may fall off from dizziness.
  • Always, maintain the rungs of the ladder horizontal. This prevents slipping each for you and the ladder. This could at all times be saved in thoughts except the ladder is secured and the danger of falling is far much less.
  • On condition that the ladder is merely hooked onto the roof, keep away from swaying facet to facet or backwards to stop accidents from taking place. Apart from sliding off the roof, there may be the danger of breaking the hook and falling off.

These precautions assist in preserving you and people on the bottom secure when engaged on the roof. Usually, a well-prepared hook eliminates the necessity to climb on the roof with out correct assist. You may simply slide it to the facet then work on one other a part of the roof.

Extra on Ladders and Roofs

Extra: How To Meet Folks In Las Vegas, Nevada

  • How one can put a Ladder on a Sloped Roof
  • How one can Stabilize Roof Ladders on Rooftop & Base
  • Finest Ladders for Cleansing Gutter & Upkeep
  • How one can Clear Gutters from the Floor with no Ladder

Leave a Reply

Your email address will not be published. Required fields are marked *