How to Make a Log Splitter with a Hydraulic Jack

How to Make a Log Splitter with a Hydraulic Jack

The way to Make a Log Splitter with a Hydraulic Jack


  • Share
  • Tweet
  • Pin

TedsWoodworking Plans and Projects

A log splitter is a great tool that particularly turns out to be useful through the chilly winter months. As an alternative of spending hours attempting to cut up firewood with an ax, you are able to do the identical job with a log splitter utilizing much less effort in an hour or much less.

Nonetheless, the value of log splitters can go as excessive as a number of hundred {dollars}, and this could be a little steep for a few of us. However with slightly effort, you possibly can already construct your individual log splitter with a hydraulic jack for only a quarter of the value – or much less if you have already got the wanted supplies mendacity round in your house.

Be taught: The way to make a log splitter with a hydraulic jack

On this article, I offers you a step-by-step information on the best way to make a log splitter with a hydraulic jack.

You Will Want

Earlier than we start with this tutorial, just be sure you have already got this stuff prepared. For those who’re the typical handyman, you could have already got these in your toolshed. In any other case, you possibly can simply purchase them at your native ironmongery shop.

Regulate the Pump Strain on a Log Splitter

Listed here are the instruments and supplies that you will want for this tutorial:

  • Hydraulic jack
  • Sheet metallic
  • Metal beam
  • Hydraulic hoses
  • A single-blade wedge
  • Metal bracket clamps
  • Acetylene torch
  • Welding masks or protecting goggles
  • Protecting gloves
  • Castor wheels, in case you need the added mobility to your log splitter.

Woodworking Plans Banner

Step 1: Construct the Body

Step one is to construct the body to your log splitter. That is vital to offer sufficient assist to your hydraulic jack whereas it really works to push the wooden onto the wedge.

Attempt to construct the body within the form of a sawhorse so that you’ve got sufficient assist from its 4 legs. The scale of the highest of the body would depend upon the dimensions of the hydraulic jack, the wedge, and the wooden you can be slicing.

When you’re selected the measurements you’ll be needing, weld all the required items to type your body. In doing so, just be sure you are carrying the required gear to guard your self through the course of.

Learn: How To Get a Pisces Man Again: What No One Tells You

How To Select The Greatest Log Splitter For You On A Tight Price range

Step 2: Construct the Sliding Block

The sliding block is the portion of the log splitter the place you can be putting the wooden. This can assist the hydraulic jack easily push the wooden onto the wedge. This additionally helps maintain the wooden securely in place.

There aren’t any particular measurements as to the sliding block – it actually is dependent upon the scale of the wooden that you can be continuously used, so weld the sliding block accordingly.

As a tip, be certain to make use of further shims and carry on testing the sliding movement of the block. When you’re happy with how your sliding block glides, we are able to now proceed with the subsequent step.

TedsWoodworking Plans and Projects

Step 3: Mount the Jack

Now, we proceed with mounting your hydraulic jack – essentially the most important a part of your log splitter. Merely place the jack on one finish of your body with the sliding block proper beneath it.

Ensuring that the jack is correctly in place will assure that the sliding block shall be successfully pushed in direction of the sharpened wedge.

When you’re achieved figuring out the place the hydraulic jack must be mounted, safe it in place by placing a collar across the neck of the jack and welding the collar onto the body. In any other case, you threat having a wobbly log splitter as you attempt to push the wooden onto the wedge.

Step 4: Connect the Wedge

On the reverse facet of the place you mounted the hydraulic jack, start to weld the blade into place. Keep in mind that the hydraulic jack will push the piece of wooden onto the blade, so it’s important to mount the blade dealing with the route of the jack.

For those who couldn’t discover or purchase a single-blade wedge to connect, you possibly can merely weld items of metallic right into a sharpened wedge. Earlier than you weld the wedge, be aware of the sort of wooden you can be slicing and the stress that the hydraulic jack can apply. This can information you as to the wedge angle that you will want to successfully minimize wooden with it.

However as a common rule, since these hydraulic jacks are operated manually, you will have to make use of a sharper wedge for simpler log splitting – simply be sure that the wedge is securely welded onto the body.

Step 5: Connect Wheels

Studying: How To Make a Trailer for Energy Wheels: 3 Examples

That is truly an optionally available step, however I might advocate attaching trolley wheels onto your do-it-yourself log splitter.

Keep in mind that the completed product shall be heavy, so having to take it out each time you wish to use it may be fairly a chore. Attaching wheels beneath the platform will enable for higher mobility, supplying you with extra choices as to the place you possibly can use it.

You may both use castor wheels or trolley wheels for this step. These wheels could be simply hooked up through the use of screws.

Some heavy-duty castor wheels can be found in case you’re utilizing heavy hydraulic jacks and high-density wooden. When you’re at it, be sure you purchase those with a lever that stops the wheels from rolling. This can be sure that your log splitter will keep in place even whereas it’s slicing wooden.

And there you might have it – you might have efficiently created your individual log splitter with a hydraulic jack.

Step 6: Check Your Machine

One of the best half about making your individual gear is you can regulate it in accordance with your liking. That is very true even to your do-it-yourself log splitter.

Now that you’re completed with constructing your machine, you possibly can check it out to find out its velocity and capability. You may start through the use of logs from smaller softwood timber and step by step improve to bigger hardwood timber.

As you take a look at out your log splitter, be aware of how the sliding block works and the way your body holds up. That is normally an indication that you’ve got reached the machine’s capability.

Additionally, be aware of how efficient the wedge is at splitting the wooden. For those who discover that it isn’t as efficient at slicing by the log, you possibly can at all times attempt to sharpen it or substitute it with a wedge with a extra applicable angle.

Carry on testing your machine till you discover the setup that you simply’re most comfy with.

Learn: Minecraft Frogs: When are we getting Frogs in Minecraft?

Leave a Reply

Your email address will not be published. Required fields are marked *