How to Make a DIY Confetti Glitter Snowglobe Starbucks Tumbler

How to Make a DIY Confetti Glitter Snowglobe Starbucks Tumbler

The way to Make a DIY Confetti Glitter Snowglobe Starbucks Tumbler

This full step-by-step tutorial for methods to make a DIY confetti and glitter snowglobe Starbucks tumbler can have you creating customized cups very quickly.

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

These stunning Starbucks glitter snow globe tumblers are so enjoyable and straightforward to make. Plus you can also make them any theme that you really want.

Study: The way to make starbucks snow globe tumbler

Seasonal? ggstore.netday? You bought it.Disney? Umm sure!

I made mine Harry potter-themed as a result of, duh, Harry Potter’s superior.

As you possibly can most likely inform from the cup I’m home Ravenclaw.

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

And since my favourite Luna Lovegood can be a Ravenclaw I assumed it acceptable to place her cute pink glasses on this cup.

So let’s speak supplies. What do it’s essential to make this cup?

Provides to make a Starbucks glitter snow globe Tumbler

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

Starbucks Tumbler or one other clear double-walled tumblerFine GlitterChunky GlitterCricut MachineCricut Occasion FoilCricut VinylSmall Funnel or paper coneClear Elmer’s GlueWaterSquirt Bottle with ounce measurementsEpoxyClear vinyl scrapDrillWide drill bit

The way to drill right into a Starbucks tumbler

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

So the very first thing you need to do is take the lid and straw off of the cup. Set them apart

Flip the cup the wrong way up.

Now, very slowly and thoroughly you’re going to use the drill and drill a gap straight down into the underside of the cup.

I used a 5/16 drill bit, however you should use a smaller one when you don’t have one thing a bit bigger.

You may have to drill two holes facet by facet to make it broad sufficient in your confetti.

For those who drill too quick you would undergo the second layer. Or crack the cup. Neither of those are issues that we wish.

You need the outlet to be close to the sting of the cup.

You don’t need to drill too far down since you don’t need to break by into the underside of the internal cup.

We’re simply attempting to make it in between the 2 cups.

I ended up having to make use of a weeding hook to interrupt it out after I had drilled far sufficient. It didn’t need to come out by itself.

Now could be after we begin including the entire customization.

The way to make your individual DIY confetti

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

I used Cricut Occasion Foil and reduce Luna Lovegood’s sun shades out of the pink Cricut celebration foil. I reduce mine .3” excessive and .78” broad.

And the Deathly Hallows form out of the silver celebration foil. Mine had been reduce .75″ broad.

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

There’s a Cricut Occasion Foil setting within the supplies listing on the reduce display. Select that and they’ll reduce fantastically.

I believe they turned out completely lovely. So so enjoyable.

After you may have these reduce out you need to stick them into the outlet that you just drilled.

The glasses slot in completely and the Deathly Hallows simply wanted a bit bend to curve them for the outlet.

After I had the confetti in I gave it a very good shake to unfold them out.

The way to fill a Starbucks tumbler with glitter

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

Extra: The way to Make a Jack Knife Couch Snug in An RV?

Subsequent, I simply took a bit of paper and rolled it right into a cone to be a funnel for the glitter. If in case you have a small funnel this works too.

Now’s the messy half. We need to add the glitter.

Ravenclaw home colours are blue and bronze.

So I added a chunky blue glitter, a superb blue glitter, and a superb bronze glitter.

Simply preserve including glitter a bit at a time till you may have a very good quantity.

I used to be utilizing a Starbucks Venti cup and possibly added a teaspoon or two of every.

I didn’t measure, that is simply to offer you an concept of how a lot.

If you’re utilizing a smaller cup, use much less glitter.

Remember to give it a very good shake to combine it about.

You possibly can cowl the outlet that you just drilled along with your finger and provides it a very good shake.

When you suppose that you’ve sufficient glitter in there you can begin including your water combination.

I ended up with about an inch of glitter on the backside.

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

What do you set right into a Starbucks glitter snow globe tumbler?

To make your water combination you want water, clear glue, and a squirt bottler with measurements.

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

If you have already got a squirt bottle that has measurement strains that may be useful.

I didn’t so I took a condiment bottle that I purchased at Greenback Tree and poured 2 ozof water in and drew a line and labeled it 2 oz.

Then I added one other 2 ounces and drew a line that I labeled it 4 oz. I saved doing this till the bottle was full.

I put 4 ozof water after which two ounces of clear Elmer’s Glue.

The glue makes the water thicker and provides it a pleasant viscosity to droop the glitter longer.

Then I put the lid on the squirt bottle, put my finger over the spout, and gave it a very good shake to combine the water and glue.

When the glue was included into the water it was time so as to add it to the tumbler.

Utilizing the squirt high of the bottle, I put that into the outlet within the backside of the cup and slowly squirted some glue water in.

I squirted in sufficient to be about an inch of water after which put my finger over the outlet and gave it a very good shake to try to incorporate the water into the glitter.

Proceed filling the tumbler with the glue water till you attain the highest.

I attempted to have as few air bubbles as doable however I believe that makes it a bit more durable to get my glitter transferring.

So if you wish to make it a bit bit simpler don’t fear about ensuring the entire air is out of the tumbler.

When you may have sufficient glue water inside your tumbler, it’s time to seal it.

The way to seal a Starbucks glitter tumbler

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

Extra: How To Make Glitter Glue Dry Sooner: Know The Completely different Methods

Dry the realm across the gap fully.

You don’t need any of the glue water on the skin of the cup mixing along with your epoxy seal.

To seal it you need to take a scrap of clear vinyl.

I simply used some clear contact paper.

I reduce a bit piece to overlap the entire after which caught it down.

When shopping for epoxy you need one thing that’s clear and waterproof. I went with the Gorilla Glue Epoxy.

Subsequent, you need to squeeze out just a bit little bit of epoxy on to one thing you’ll throw away, a few quarter measurement, and blend it collectively.

Once you’re able to put it on simply put it excessive of the clear vinyl.

It most likely couldn’t damage to place a bit on the underside of your vinyl across the gap as nicely, if you wish to be double protected.

For those who don’t put a barrier such because the clear vinyl earlier than you set the epoxy on then your epoxy will begin dripping into your cup.

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

I wasn’t even eager about that and I ended up with an epoxy booger inside my cup.

It’s superb. You possibly can hardly inform as soon as the glitter is transferring.

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

So don’t make the identical mistake like me and you should definitely put some clear vinyl earlier than your epoxy.

Cowl the entire piece of vinyl with epoxy and off the perimeters of the vinyl as nicely. You desire a good seal.

Let the epoxy arrange for the beneficial period of time.

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

Now you’re performed with the glitter snow globe a part of the tumbler.

The way to add a customized emblem to your Starbucks tumbler

For a bit further enjoyable, I added a Ravenclaw Pleasure textual content across the Starbucks emblem. I acquired it from this Etsy store.

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

I simply use some black and white Cricut vinyl and sized it appropriately.

The Starbuck siren emblem is just not an ideal circle.

Measurement yours to three.654 broad by 3.41 excessive.

This overlap the emblem some however you gained’t have any gaps.

Earlier than making use of your vinyl to the skin of the cup you should definitely wipe it down with alcohol to scrub the realm in order that it is freed from any oils or smudges.

This full step-by-step tutorial for how to make a DIY confetti and glitter snowglobe Starbucks tumbler will have you creating custom cups in no time.

Utilizing the hinge methodology works nice for a mission like this.

And that’s it. You’ve now created an attractive glitter snowglobe Starbucks tumbler with customized DIY confetti.

This can be a considered one of a sort cup and it makes an ideal present.

Need extra Cricut crafts?

Extra: The way to Make Cowboy Boots Tighter Round Calf

want more cricut projects

Leave a Reply

Your email address will not be published. Required fields are marked *